Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

ITW Dykem Yellow 83417 Cross Check Plus 1Oz

Hazardous product
Hazardous material Special shipping rules and carrier restrictions may apply.
https://www-old.roctexo.com/web/image/product.template/113663/image_1920?unique=41f2ce3
Part numbers : RX1-09-25811-1 , 83417 , 09-25811-1
Unit of Measure: EA

19.43 EUR / EA 19.43 EUR 19.43 € excl. VAT

19.43 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
104 EA available on request, fees apply
Hazardous material special order from vendor stock.

DYKEM® Cross Check™ Plus Aviation Grade Torque Seal® is a yellow, Skydrol®-resistant indicator paste for applying visual witness marks to nuts, bolts, fasteners and assemblies. A broken mark can provide a clear visual indication of movement, vibratory loosening or possible tampering during inspection.

Manufacturer part number 83417 is supplied in a 1 oz yellow container. The fluorescent yellow marking is designed for enhanced visibility, including under UV/black light.

  • DYKEM® Cross Check™ Plus, yellow
  • Manufacturer part number: 83417
  • Container size: 1 oz
  • Skydrol®-resistant formulation
  • Touch-dry in less than one minute; full cure in 24 hours, according to the manufacturer
  • Manufacturer states compliance with Boeing BMS8-45H Type I/III and Embraer MEP 09-096 Rev. L requirements for yellow product

Suitable for maintenance and assembly procedures where a readily visible torque-marking compound is specified or required by the applicable approved maintenance data. Consult the manufacturer’s technical data sheet and safety data sheet before use.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.