Skip to Content
  1. All Products
  2. All Products
  3. Garrecht Compact Transponder M-S C-2
Select currency EUR
Garrecht Compact Transponder M-S C-2

Image for illustration only. It may show a product series rather than the exact product offered.

Garrecht Compact Transponder M-S C-2

https://www-old.roctexo.com/web/image/product.template/69958/image_1920?unique=8ef9bbe
Part number : RX1-11-05870
Unit of Measure: EA

2092.38 EUR / EA 2092.38 EUR 2,092.38 € excl. VAT

2092.38 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Garrecht Compact Transponder M-S C-2 is a compact, single-block Mode S transponder from the VT-01 UltraCompact family. Manufacturer part number VT-0104-070, it is the Class 2 version designed for panel installation where a compact integrated transponder solution is required.

The unit incorporates an internal altitude encoder and is specified as a Level 2se Mode S transponder. Its Class 2 configuration provides a minimum RF output of 71 W at the antenna.

  • Manufacturer part number: VT-0104-070
  • Product designation: Garrecht Compact Transponder M-S C-2
  • Single-block VT-01 UltraCompact configuration
  • Mode S transponder, Level 2se
  • Integrated altitude encoder
  • Class 2 minimum RF output: 71 W
  • Published operating limitations for the Class 2 VT-0104-070: maximum 175 kt, 4,570 m (15,000 ft), and 5,700 kg MTOW

Installation, configuration, antenna installation and applicable approval requirements must be assessed for the individual aircraft by appropriately qualified avionics personnel. Consult the manufacturer’s VT-01 installation manual before installation.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.