Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

EZ Flap Handle Extension Original Style

https://www-old.roctexo.com/web/image/product.template/49972/image_1920?unique=8ef9bbe
Part numbers : RX1-13-06946 , 13-06946
Unit of Measure: EA

514.82 EUR / EA 514.82 EUR 514.82 € excl. VAT

514.82 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The EZ Flap Handle Extension – Original Style is an add-on extension for the existing flap handle on applicable manual-flap aircraft. It is designed to bring flap control closer to the pilot’s normal seated position, helping reduce the need to lean forward during flap selection.

The Original Style is referenced in published EZ Flap installation material as EZ-16. It mounts to the OEM flap handle; correct model selection and installation must be verified against the applicable installation instructions and aircraft configuration.

  • Original Style EZ Flap handle extension
  • For applicable manual flap installations
  • Published application guidance references selected Cessna 170/172/175/180/182/185, Piper PA-28/PA-32/PA-34/PA-44, and Beech 19/23/24 aircraft
  • Reference documentation: EZ Flap Installation and Adjustment Instructions, STC SA02246LA

Installation and airworthiness acceptance should be determined by appropriately qualified maintenance personnel in accordance with the applicable aircraft documentation and local regulatory requirements.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.