Skip to Content
  1. All Products
  2. All Products
  3. Electronics International P-110 EGT TIT Replacement Probe Hose Clamp Type
Select currency EUR

Image for illustration only. It may show a product series rather than the exact product offered.

Electronics International P-110 EGT TIT Replacement Probe Hose Clamp Type

https://www-old.roctexo.com/web/image/product.template/20264/image_1920?unique=8ef9bbe
Part numbers : RX1-10-01591 , P-110-R , ASS-10-01591 , 10-01591
Unit of Measure: EA

117.73 EUR / EA 117.73 EUR 117.73 € excl. VAT

117.73 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA ready to ship Today
Order before 15:30 CET Today
Up to 2 EA ready to ship on Thursday 2026-11-12
Order before 15:30 CET Today
43 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Electronics International P-110-R is a robust replacement EGT/TIT probe for hose-clamp installation. It uses an ungrounded Type K thermocouple and a 316L stainless-steel body for dependable exhaust-temperature measurement.

Designed for installation in a 13/64 in (approximately 5.2 mm) hole, this probe is identified by manufacturer part number P-110-R.

  • Hose-clamp type EGT/TIT probe
  • Robust-style probe
  • Type K thermocouple, ungrounded configuration
  • 316L stainless-steel construction
  • For a 13/64 in (approximately 5.2 mm) installation hole
  • Manufacturer states FAA TSO and PMA status

Supplied as a replacement probe. Installation should be carried out in accordance with the applicable Electronics International instructions and approved maintenance data. EASA approval status should be verified for the intended installation.

Manufacturer documentation is available from Electronics International temperature-probe downloads.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

MFGDescriptionPN
P-110-REGT/TIT Standard 13/64" dia Probe (Robust)10-01591

Overview

P-110 Probes including: Standard & Fast Response with or without 6ft lead - Hose Clamp type
    P-110-R - EGT/TIT Probe - Hose Clamp Type, Used with 13/64” Hole. Standard with most kits. Weight: 1.6 oz

    FAST RESPONSE P-110-F - EGT/TIT Probe - Hose Clamp Type, used with .130” hole. Optional with most kits. Weight: 1.3 oz

The basic difference between the P-110R (robust) and the P-110F (fast response) is the physical diameter of the probe. The P-110F measures .125" and the P-110R measures .187". The smaller diameter allows for a faster responding signal. Additionally, the depth of the probe can be adjusted with the P-110F as it uses a tapered ferrule to secure the probe. The P-110R uses two clips to secure the probe to the clamp.

In The Box

  • Probe & installation instructions



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.