Skip to Content
  1. All Products
  2. All Products
  3. Eaton Hose 303-12 3/4
Select currency EUR
Eaton Hose 303-12 3/4

Image for illustration only. It may show a product series rather than the exact product offered.

Eaton Hose 303-12 3/4

https://www-old.roctexo.com/web/image/product.template/74537/image_1920?unique=8ef9bbe
Part numbers : RX1-303-12 , 303-12 , 303-12
Unit of Measure: FT

23.47 EUR / FT 23.47 EUR 23.47 € excl. VAT

23.47 EUR / FT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 37 FT ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today
Up to 84 FT ready to ship on Monday 2026-11-16
Order before 16:00 CET Today
161 FT available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

Eaton Aeroquip 303-12 is a medium-pressure, wire-reinforced synthetic rubber hose supplied by the foot. Part number 303-12 is the -12 size in the Aeroquip 303 hose series, with a nominal 19 mm tube size designation.

The hose has a seamless synthetic rubber inner tube, single wire-braid reinforcement and an oil-resistant fabric outer cover. Eaton identifies the 303 series for aircraft hydraulic, pneumatic, fuel, oil and coolant fluid conveyance applications.

  • Manufacturer: Eaton
  • Manufacturer part number: 303-12
  • Hose series: Aeroquip 303
  • Nominal hose bore: 15.9 mm
  • Maximum operating pressure: 10.3 MPa
  • Operating temperature range: -54 °C to +122 °C
  • Hose specification: MIL-DTL-8794
  • Unit of measure: foot
  • Approximate mass: 0.207 kg per foot

Please confirm the required hose size, fluid suitability and installation requirements against the applicable maintenance data before use.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.