Skip to Content
  1. All Products
  2. All Products
  3. Eaton AE641-4 Aeroquip Hose
Select currency EUR
Eaton AE641-4 Aeroquip Hose

Image for illustration only. It may show a product series rather than the exact product offered.

Eaton AE641-4 Aeroquip Hose

https://www-old.roctexo.com/web/image/product.template/287083/image_1920?unique=8ef9bbe
Part numbers : RX1-05-32408 , AE641-4 , 05-32408
Unit of Measure: EA

44.50 EUR / EA 44.5 EUR 44.50 € excl. VAT

44.50 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Eaton Aeroquip® AE641-4 is a size -4 flexible aerospace hose from Eaton’s AE641 series. It features a convoluted PTFE inner tube with stainless-steel wire braid reinforcement, providing a compact hose solution where routing space and bend radius are important considerations.

Designed by Eaton for fuel, hydraulic, coolant and other aircraft-fluid systems, the AE641 series is intended for nominal operating pressures below 1,000 psi (6.89 MPa), depending on hose size and installation requirements.

  • Manufacturer: Eaton
  • Manufacturer part number: AE641-4
  • Roctexo part number: RX1-05-32408
  • Hose construction: convoluted PTFE core with stainless-steel wire braid
  • Size: -4
  • Published AE641 -4 data: minimum internal diameter 7.0 mm; maximum outside diameter 12.1 mm; minimum bend radius 31.8 mm

Please verify the required hose length, end fittings, installation configuration and applicable approved technical data before purchase and installation.

Relevant manufacturer documentation: Eaton Aeroquip convoluted PTFE hose brochure.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.