Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Eaton AE566-20 Hose

https://www-old.roctexo.com/web/image/product.template/86540/image_1920?unique=f385c39
Part numbers : RX1-AE566-20 , AE566-20 , AE566-20
Unit of Measure: FT

107.48 EUR / FT 107.48 EUR 107.48 € excl. VAT

107.48 EUR / FT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
8 FT available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Eaton Aeroquip AE566-20 is a medium-pressure PTFE hose with an integral polyester chafe guard. It is supplied as bulk hose by the foot for use where the correct hose length and qualified assembly configuration are determined by the applicable maintenance or engineering data.

  • Manufacturer: Eaton Aeroquip
  • Manufacturer part number: AE566-20
  • Roctexo part number: RX1-AE566-20
  • Dash size: -20; nominal tube size: 31.8 mm (1 1/4 in)
  • Hose internal diameter, minimum: 28.0 mm
  • Hose outside diameter, maximum: 37.1 mm
  • Maximum operating pressure: 6,894 kPa (1,000 psi)
  • Proof pressure: 13,789 kPa (2,000 psi)
  • Minimum burst pressure at room temperature: 27,579 kPa (4,000 psi)
  • Minimum bend radius: 279 mm
  • Approximate hose weight: 0.293 kg/ft
  • Catalogue temperature range: -54 °C to +149 °C

Confirm the required hose, fittings, assembly method and installation requirements against the applicable approved technical documentation before use.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.