Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

EarthX 24-In Charging Quick Connect Cables For ETX-JMP 12V/24V ETX-QCC2

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for EarthX, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by EarthX.
https://www-old.roctexo.com/web/image/product.template/294103/image_1920?unique=8ef9bbe
Part numbers : RX1-11-21180 , ETX-QCC2 , 11-21180
Unit of Measure: EA

28.08 EUR / EA 28.08 EUR 28.08 € excl. VAT

28.08 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The EarthX ETX-QCC2 is a 24 in (60 cm) quick-connect cable assembly intended to provide a permanently installed access point for battery charging and jump-starting. It may be fitted to 12 V or 24 V lead-acid or lithium battery installations.

The assembly uses 150-strand insulated copper cable, M6 ring terminals and an industry-standard 2-pole SAE connector with a rubber sealing cap. EarthX states a maximum jump-start capability of 800 A at 12 V or 400 A at 24 V.

  • Manufacturer part number: ETX-QCC2
  • Battery pigtail length: 60 cm
  • Ring terminals: 1/4 in / M6
  • Connector: 2-pole SAE connector with rubber sealing cap
  • For charging access or connection to a compatible portable jump starter

Keep the sealing cap closed when the connector is not in use. Verify connector polarity before connecting a jump pack, and disconnect the cable if it becomes hot during use. A portable jump starter is not included.

For product information and operating guidance, refer to the EarthX ETX-QCC2 product page.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.