Skip to Content
  1. All Products
  2. All Products
  3. Dzus Grommets GA4-250
Select currency EUR

Image for illustration only. It may show a product series rather than the exact product offered.

Dzus Grommets GA4-250

https://www-old.roctexo.com/web/image/product.template/102449/image_1920?unique=8ef9bbe
Part numbers : RX1-GA4-250 , D4-GA4-250NA , GA4-250
Unit of Measure: EA

2.39 EUR / EA 2.39 EUR 2.39 € excl. VAT

2.39 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
4 EA ready to ship Today
Order before 15:30 CET Today
Up to 503 EA ready to ship on Thursday 2026-11-12
Order before 15:30 CET Today
Up to 616 EA ready to ship on Monday 2026-11-16
Order before 15:30 CET Today
1,005 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Southco DZUS® D4-GA4-250NA is a size 4 full grommet/retainer for DZUS® Standard-Line quarter-turn fastening arrangements. The GA-style full grommet is intended for use with protruding-head studs and helps protect the panel finish while reducing stud play.

  • Manufacturer part number: D4-GA4-250NA
  • Roctexo part number: RX1-GA4-250
  • Size: 4
  • Material/finish: natural aluminium
  • Length: 6.35 mm
  • Specified panel-thickness range: 1.29–2.38 mm
  • Installation requires the appropriate grommet installation tooling.

Supplied as an individual piece (EA). Please verify the required stud style, panel configuration and installation-tool requirements against the applicable maintenance data before purchase or installation.

Reference documentation: Southco DZUS® D4 Standard Line Quarter-Turn Fasteners catalogue.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

TypeModelOuter Panel ThicknessLengthABCPart No.
GA1271-4250.026 - .050.250.311.405.025GA4-250

Overview

A full grommet is used when protection of the hole is a definite consideration. It protects panel finish and reduces stud play. A tool is required for installation. The "GA" type full grommet is used with a protruding head stud, and the "GF" type with a flush head stud.

Reference Chart


These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.