Skip to Content
  1. All Products
  2. All Products
  3. Dzus Cowl Latch Draw Latch Over Center
Select currency EUR
Dzus Cowl Latch Draw Latch Over Center

Image for illustration only. It may show a product series rather than the exact product offered.

Dzus Cowl Latch Draw Latch Over Center

https://www-old.roctexo.com/web/image/product.template/123867/image_1920?unique=187acfc
Part numbers : RX1-05-01190 , 7883-2-Z3Y , ASS-05-01190 , TL-20-102-07 , 05-01190
Unit of Measure: EA

3.92 EUR / EA 3.92 EUR 3.92 € excl. VAT

3.92 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 22 EA ready to ship on Monday 2026-11-16
Order before 17:00 CET on Friday 2026-11-13
Up to 87 EA ready to ship on Thursday 2026-11-19
Order before 17:00 CET on Friday 2026-11-13
148 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

Dzus Model II over-centre draw latch for cowl doors and other access-panel fastening applications. This latch is supplied as an individual unit and is identified by manufacturer part numbers 7883-2-Z3Y and TL-20-102-07.

The Model II latch provides a stated working strength of 45 lbf (approximately 200 N) and ultimate strength of 220 lbf (approximately 980 N). Pull-up travel is 0.2 in (approximately 5 mm).

  • Over-centre draw-latch design
  • Model II configuration
  • Mounting holes accept approximately 4 mm diameter rivets or No. 6 round-head screws
  • Latch strike is ordered separately

Suitable for maintenance, repair and fabrication requirements where the specified latch configuration and part numbers are required.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.