Skip to Content
  1. All Products
  2. All Products
  3. Dynon Skyview SV-Com-T25 COMMTransceiver 25 Khz TSO
Select currency EUR
Dynon Skyview SV-Com-T25 COMMTransceiver 25 Khz TSO

Image for illustration only. It may show a product series rather than the exact product offered.

Dynon Skyview SV-Com-T25 COMMTransceiver 25 Khz TSO

https://www-old.roctexo.com/web/image/product.template/43884/image_1920?unique=8ef9bbe
Part numbers : RX1-10-07387 , 103708-000 , 10-07387
Unit of Measure: EA

1620.14 EUR / EA 1620.14 EUR 1,620.14 € excl. VAT

1620.14 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
3 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Dynon SkyView SV-COM-T25 is a remote-mounted VHF COM transceiver for a Dynon SkyView communications installation. Manufacturer part number 103708-000, this 25 kHz unit is supplied as the transceiver module only.

When installed with the required SkyView COM control panel and associated SkyView system, the radio supports SkyView-based frequency selection by airport and station type, manual frequency entry, active/standby operation and dual-watch monitoring.

  • VHF COM frequency range: 118.000–136.992 MHz
  • Channel spacing: 25 kHz
  • TSO transceiver
  • Power input: 10–30 VDC
  • Transmit power: 6 W
  • Antenna connection: TNC
  • Approximate transceiver module dimensions: 160 × 66 × 48 mm
  • Approximate module weight: 0.35 kg

The SV-COM-T25 is intended to be used with one Dynon SV-COM-PANEL control panel per transceiver; the panel is a separate component. Review the applicable Dynon SkyView installation and operating documentation before installation or configuration.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.