Dillon Quick Check Tension Meter 2000 Lb.

The Dillon Quick-Check is a portable cable tension meter designed to clamp onto a cable, measure tension and be removed quickly. This 2,000 lb capacity version is identified by manufacturer part number AWT05-508112.

It is intended for tension measurement on wire rope and cable where the instrument has been calibrated for the applicable wire size and construction. Dillon specifies a working wire-size range from 4.75 mm to 25.4 mm and an accuracy of ±3% of instrument capacity when calibrated to the specific wire type and size.

• Capacity: 2,000 lbf (approximately 10 kN)
• Wire-size range: 4.75–25.4 mm
• Check-tensioning mode for setting target line tension
• Digital display with full-text prompts and soft-key interface
• Designed for continued outdoor use
• Operates on AA batteries

For accurate results, select the calibration and sheave arrangement appropriate to the cable being measured. Where different wire constructions are used at the same diameter, separate calibration may be required.

Manufacturer documentation is available from Dillon: Quick-Check Tension Meter.