Skip to Content
  1. All Products
  2. All Products
  3. Differential Cylinder Pressure Tester 5 Bore (Large)
Select currency EUR
Differential Cylinder Pressure Tester 5 Bore (Large)

Image for illustration only. It may show a product series rather than the exact product offered.

Differential Cylinder Pressure Tester 5 Bore (Large)

https://www-old.roctexo.com/web/image/product.template/70244/image_1920?unique=8ef9bbe
Part numbers : RX1-12-02345 , 2E-60 , 12-02345
Unit of Measure: EA

135.76 EUR / EA 135.76 EUR 135.76 € excl. VAT

135.76 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 5 EA ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today
Up to 9 EA ready to ship on Monday 2026-11-16
Order before 16:00 CET Today
3 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The ATS Pro Differential Cylinder Pressure Tester, part number 2E-60, is a large-bore differential pressure tester intended for engine cylinders with bore diameters above 127 mm (5 in).

Its on/off safety valve helps relieve hose pressure before disconnecting from the cylinder. The tester may be used during cylinder condition checks to help identify leakage associated with valves, piston rings, cylinders or bushes.

  • 1.52 mm (0.060 in) calibrated orifice
  • Precision gauges matched within ±2%
  • 18 mm spark-plug adapter
  • Approx. 610 mm (24 in) pressure hose
  • Factory calibrated
  • Supplied with operating instructions

Use in accordance with the applicable engine manufacturer’s maintenance data and approved maintenance procedures.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

Overview

Comes complete with on-off safety valve to eliminate hose pressure when disconnecting from the cylinder. Can be used to check intake or exhaust valves, cracked or worn rings, defective cylinders, worn bushings, etc.

Specifications: Orifice size is .060". precision gauges matched to within +/-2%. 18MM plug adapter. Includes hose and spark plug adapter. Factory calibrated. Letter of certification available upon request.

Note: For an engine cylinder with 5.00 inch bore and over: 0.060 inch orifice diameter, .250 inch long, and a 60 degree approach angle.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.