Skip to Content
  1. All Products
  2. All Products
  3. David Clark H10-13S Headset Dual Plugs Stereo H10
Select currency EUR
David Clark H10-13S Headset Dual Plugs Stereo H10

Image for illustration only. It may show a product series rather than the exact product offered.

David Clark H10-13S Headset Dual Plugs Stereo H10

https://www-old.roctexo.com/web/image/product.template/17438/image_1920?unique=8ef9bbe
Part numbers : RX1-11-03816 , 40422G-01 , 11-03816
Unit of Measure: EA

386.51 EUR / EA 386.51 EUR 386.51 € excl. VAT

386.51 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 6 EA ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today
9 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The David Clark H10-13S is an over-the-head, passive noise-attenuating stereo aviation headset. Manufacturer part number 40422G-01.

This stereo version of the H10-13.4 is fitted with a straight approximately 1.5 m cord, dual PJ plugs and an inline stereo/mono switch. It uses a PJ-055 phone plug and PJ-068 microphone plug.

  • Certified noise reduction rating: 23 dB
  • M-7A amplified electret, noise-cancelling microphone
  • Universal-flex boom for microphone positioning
  • Expanded super-soft double-foam head pad
  • Undercut Comfort Gel ear seals
  • Low-profile volume control with detent settings
  • Approximate headset-only weight: 488 g

The H10-13S is a practical headset option for stereo aviation audio installations using the listed dual-plug connection arrangement. Please verify connector configuration and aircraft/intercom suitability before purchase or installation.

Manufacturer data sheet: David Clark H10-13S

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.