Skip to Content
  1. All Products
  2. All Products
  3. Curtis Oil Drain Valve M12-1.5 CCA-1215C
Select currency EUR
Curtis Oil Drain Valve M12-1.5 CCA-1215C

Image for illustration only. It may show a product series rather than the exact product offered.

Curtis Oil Drain Valve M12-1.5 CCA-1215C

https://www-old.roctexo.com/web/image/product.template/129863/image_1920?unique=0f3001a
Part numbers : RX1-05-27363 , CCA-1815C , 05-27363
Unit of Measure: EA

74.29 EUR / EA 74.29 EUR 74.29 € excl. VAT

74.29 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
6 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Curtis CCA-1815C is an oil drain valve assembly with an M18 × 1.5 thread. Its push-to-open, turn-to-lock operating design uses the supplied activation tool and hose to direct drained oil into a suitable collection container.

  • Manufacturer part number: CCA-1815C
  • Roctexo part number: RX1-05-27363
  • Thread: M18 × 1.5
  • Valve material: nickel-plated brass
  • Valve action: push to open; turn to lock
  • Installed length: approximately 32 mm
  • Kit contents: drain valve with dust cover, activation tool with approximately 305 mm attached hose, and copper mounting washer
  • Lock-wire drilling: none

Please verify the engine drain-port thread, available installation clearance, and applicable maintenance instructions before installation. The product title references M12-1.5 and CCA-1215C; however, the available source data for manufacturer part number CCA-1815C specifies an M18 × 1.5 thread.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.