Skip to Content
  1. All Products
  2. All Products
  3. Concorde Battery SR04007AT STC
Select currency EUR
Concorde Battery SR04007AT STC

Image for illustration only. It may show a product series rather than the exact product offered.

Concorde Battery SR04007AT STC

https://www-old.roctexo.com/web/image/product.template/294905/image_1920?unique=8ef9bbe
Part numbers : RX1-11-21323 , SR04007AT , 11-21323
Unit of Measure: EA

1518.04 EUR / EA 1518.04 EUR 1,518.04 € excl. VAT

1518.04 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

Concorde Battery SR04007AT is an FAA Supplemental Type Certificate (STC) reference for installation of the Concorde RG-427 valve-regulated sealed lead-acid (VRSLA) aircraft battery.

According to Concorde Battery documentation, STC SR04007AT provides for installation of the 24 V, 34 Ah RG-427 high-capacity battery in specified Leonardo A119 and AW119 MKII helicopter applications, replacing either the original 24 V, 27 Ah Ni-Cd battery or a Concorde RG-407 battery.

  • Manufacturer / STC reference: Concorde Battery SR04007AT
  • Associated battery: Concorde RG-427
  • Battery type: valve-regulated sealed lead-acid (VRSLA)
  • Referenced battery rating: 24 V, 34 Ah
  • Manufacturer documentation also references placard P/N 6228.

Aircraft applicability, installation configuration and continued airworthiness requirements must be confirmed against the current STC data, approved maintenance documentation and the applicable aviation authority requirements before installation. EASA acceptance or approval status should be verified for the intended aircraft and operation.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.