Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Comant CI-2480-200 Comdat VHF GPS Antenna BNC

https://www-old.roctexo.com/web/image/product.template/76632/image_1920?unique=8ef9bbe
Part numbers : RX1-11-05850 , CI-2480-200 , 11-05850
Unit of Measure: EA

1008.04 EUR / EA 1008.04 EUR 1,008.04 € excl. VAT

1008.04 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Comant CI-2480-200 ComDat® is a dual-function VHF communications and GPS antenna designed to combine both functions within one radome. It provides separate connections for the two systems: a BNC connector for the VHF port and a TNC connector for the GPS port.

The antenna covers the 118–137 MHz VHF communications band and the 1575.42 MHz GPS frequency. Its integrated GPS preamplifier provides 26.5 dB gain, while the built-in harmonic-suppression filter is specified to provide 80 dB typical VHF harmonic rejection.

  • Manufacturer part number: CI-2480-200
  • VHF frequency range: 118–137 MHz
  • GPS frequency: 1575.42 MHz
  • GPS gain: 26.5 dB
  • VHF connector: BNC
  • GPS connector: TNC
  • VHF power rating: 50 W
  • Published configuration: four-hole mounting footprint
  • Maximum overall height: approximately 432 mm
  • Published environmental and approval references: RTCA DO-160D; FAA TSO-C37d, C38d and C144

Comant identifies this model for single-engine piston-aircraft VHF/GPS applications. Installation should be carried out using the applicable current manufacturer installation drawing and aircraft-approved installation data.

Reference documentation: Comant CI-2480-200 ComDat VHF/GPS technical data sheet and installation drawing.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.