Skip to Content
  1. All Products
  2. All Products
  3. Comant 401-220 GPS Antenna
Select currency EUR
Comant 401-220 GPS Antenna

Image for illustration only. It may show a product series rather than the exact product offered.

Comant 401-220 GPS Antenna

https://www-old.roctexo.com/web/image/product.template/26974/image_1920?unique=074cb06
Part numbers : RX1-11-04139 , CI-401-220 , 11-04139
Unit of Measure: EA

641.62 EUR / EA 641.62 EUR 641.62 € excl. VAT

641.62 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Comant Industries CI-401-220 ComDat® is a stand-alone GPS antenna for panel-mounted GPS installations. It uses a four-hole, ARINC 743A-style mounting footprint and a TNC female RF connector.

Designed for reception at the GPS L1 frequency, the CI-401-220 provides a hemispherical radiation pattern and right-hand circular polarisation (RHCP). Its integrated preamplifier is specified for systems requiring 26.5 to 31.5 dB gain.

  • Manufacturer part number: CI-401-220
  • GPS frequency: 1575.42 MHz ±3 MHz
  • Gain: 26.5 to 31.5 dB
  • Output impedance: 50 Ω
  • Connector: TNC female
  • Supply voltage: 4 to 24 V DC
  • Current consumption: 25 to 40 mA
  • Polarisation: RHCP
  • Radiation pattern: hemispherical
  • Published environmental / TSO references: RTCA DO-160D and TSO-C144

The antenna is intended for use with compatible panel-mounted GPS equipment. Installation and eligibility for a particular aircraft or avionics configuration should be confirmed against the applicable approved installation data and equipment documentation.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.