Skip to Content
  1. All Products
  2. All Products
  3. Cherry H513-08-35 Pulling Head
Select currency EUR
Cherry H513-08-35 Pulling Head

Image for illustration only. It may show a product series rather than the exact product offered.

Cherry H513-08-35 Pulling Head

https://www-old.roctexo.com/web/image/product.template/70257/image_1920?unique=8ef9bbe
Part numbers : RX1-12-03025 , H513-08-35 , 12-03025
Unit of Measure: EA

1665.60 EUR / EA 1665.6 EUR 1,665.60 € excl. VAT

1665.60 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Cherry Aerospace H513-08-35 is a short nose Lockbolt pulling head designed for installation of -08 diameter Lockbolt fasteners.

Manufacturer part number: H513-08-35.

  • Short nose pulling-head configuration
  • For -08 diameter Lockbolt fasteners
  • Specified by Cherry Aerospace for use with G83 and G84 power riveters
  • May be used with the G84-LS split power riveter when fitted with adaptor 744-700
  • May be used with G85D and G87D riveters when fitted with adaptor 552

For correct installation, use the appropriate pulling-head and nose-piece configuration and follow the applicable Cherry Aerospace tool instructions.

Relevant documentation: Cherry Aerospace Technical Data Sheet TS-H513-08-35, Rev. C.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.