Skip to Content
  1. All Products
  2. All Products
  3. CEET-15 Ducting 3 3/4 8Ft
Select currency EUR
CEET-15 Ducting 3 3/4 8Ft

Image for illustration only. It may show a product series rather than the exact product offered.

CEET-15 Ducting 3 3/4 8Ft

https://www-old.roctexo.com/web/image/product.template/111291/image_1920?unique=6686646
Part numbers : RX1-05-30515-8 , 05-30515-8
Unit of Measure: EA

191.28 EUR / EA 191.28 EUR 191.28 € excl. VAT

191.28 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 3 EA ready to ship on Monday 2026-11-16
Order before 17:00 CET on Friday 2026-11-13
7 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

CEET-15 flexible ducting supplied as an approximately 2.4 m length, with a nominal internal diameter of approximately 95 mm.

This ducting is identified as equivalent to Venair Vena® MTD construction, using two fibreglass textile reinforcements with a black neoprene rubber compound and a steel-wire spiral enclosed between the neoprene layers. The construction is designed to provide flexibility and resistance to ageing for air or gaseous-fluid ducting installations.

  • Nominal internal diameter: 95 mm
  • Supplied length: approximately 2.4 m
  • Construction: black neoprene-coated fibreglass with enclosed steel-wire reinforcement
  • Operating temperature range: -55 °C to +125 °C
  • Short-duration temperature exposure: up to +150 °C
  • Roctexo part number: RX1-05-30515-8
  • Unit of measure: each

Please verify diameter, routing requirements, bend radius and the applicable maintenance data before installation.

Documentation: Venair Vena® MT / MTD technical datasheet (PDF).

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.