Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Britta Pilotlights 24V Dimmer 30A

https://www-old.roctexo.com/web/image/product.template/96665/image_1920?unique=31278e2
Part numbers : RX1-11-16082 , 24VDIMMER01-30A , 11-16082
Unit of Measure: EA

99.90 EUR / EA 99.9 EUR 99.90 € excl. VAT

99.90 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Britta Pilotlights 24 V Dimmer is a single-channel PWM electronic dimmer for DC lighting applications. Identified by manufacturer part number 24VDIMMER01-30A, it is intended for controlling compatible LED and incandescent lighting loads in 24 V electrical systems.

The unit uses a separate rheostat for continuously variable brightness control and incorporates an on/off function at the control. Its modular arrangement separates the rheostat from the dimmer PCB, supporting panel-mounted control installations.

  • Manufacturer part number: 24VDIMMER01-30A
  • Nominal system: 24 V DC; manufacturer instructions specify a 20–28 V DC working input range
  • Maximum output current: up to 30 A
  • Single-channel PWM dimming for LED and incandescent loads
  • Over-current, reverse-polarity and over-voltage protection
  • Onboard ATM fuse
  • 12 AWG screw-down input and output terminals
  • Separate rheostat with colour-coded wiring, approximately 30 cm of wire, and fluted control knob
  • Rheostat shaft diameter: 6.75 mm; mounting thread length: 12 mm

For installation, wiring protection and operating limits, refer to the manufacturer’s instructions and specifications.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.