Skip to Content
  1. All Products
  2. All Products
  3. BRACKETS SHOULDER HARNESS FR
Select currency EUR
BRACKETS SHOULDER HARNESS FR

Image for illustration only. It may show a product series rather than the exact product offered.

BRACKETS SHOULDER HARNESS FR

https://www-old.roctexo.com/web/image/product.template/621559/image_1920?unique=4276939
Part numbers : RX22-MCF-3232-1-7/8 , 3232-1-7/8 , MCF-3232-1-7/8
Unit of Measure: EA

153.33 EUR / EA 153.33 EUR 153.33 € excl. VAT

153.33 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

3232-1-7/8 is a front shoulder-harness attachment bracket intended for clamping to a 7/8 in (22.2 mm) rear spar carry-through tube. The bracket is manufactured from 304 stainless steel and provides a dedicated attachment point for a shoulder harness at the fuselage frame.

The source documentation identifies this item as an FAA PMA modification article. Aircraft eligibility, approval acceptance and installation must be confirmed against the applicable aircraft records and approved maintenance data before fitment.

  • Part number: 3232-1-7/8
  • Roctexo part number: RX22-MCF-3232-1-7/8
  • Position: Front shoulder-harness attachment bracket
  • Tube size: 7/8 in (22.2 mm)
  • Material: 304 stainless steel
  • Approximate dimensions: 229 × 140 × 32 mm
  • Approximate weight: 184 g
  • Unit of measure: Each

Installation instructions, including weight-and-balance information, are available in the 3232 installation instructions.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.