Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Bogert Piper Copper Cable Kit 03M-Kit-PA-25D-260 Sn# 7565153 - 08156024

https://www-old.roctexo.com/web/image/product.template/134029/image_1920?unique=8ef9bbe
Part numbers : RX1-11-20139 , 03M-KIT-PA-25D-260 , 11-20139
Unit of Measure: EA

501.05 EUR / EA 501.05 EUR 501.05 € excl. VAT

501.05 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

Bogert Aviation 03M-KIT-PA-25D-260 is a preassembled copper cable kit for Piper PA-25D-260 aircraft within serial number range 25-7565153 through 25-8156024.

The manufacturer describes the kit as using flexible 1-gauge M22759 copper cable, cut to length and assembled with slim-head terminals and shrink-tube insulation. It is supplied ready for installation with instructions, a cable schematic, sample logbook and Form 337 entries, weight-and-balance guidance, and STC/AML documentation.

  • Manufacturer: Bogert Aviation
  • Manufacturer part number: 03M-KIT-PA-25D-260
  • Aircraft designation: Piper PA-25D-260
  • Applicable serial numbers: 25-7565153 to 25-8156024
  • Flexible 1-gauge M22759 copper cable assemblies
  • Slim-head terminals with shrink-tube insulation
  • FAA/PMA approved under STC SA3531NM, according to the manufacturer

Confirm aircraft serial number, installed starter configuration, and applicable approval requirements with appropriately qualified maintenance personnel before installation. EASA approval or validation is not stated by the manufacturer.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.