Skip to Content
  1. All Products
  2. All Products
  3. Bogert Cable Piper PA32R-300
Select currency EUR
Bogert Cable Piper PA32R-300

Image for illustration only. It may show a product series rather than the exact product offered.

Bogert Cable Piper PA32R-300

https://www-old.roctexo.com/web/image/product.template/114533/image_1920?unique=8ef9bbe
Part numbers : RX1-11-15172 , 03M-KIT-PA-32R-300 , 11-15172
Unit of Measure: EA

649.92 EUR / EA 649.92 EUR 649.92 € excl. VAT

649.92 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Bogert Aviation copper battery cable kit, manufacturer part number 03M-KIT-PA-32R-300, is configured for Piper PA-32R-300 aircraft in the serial-number range 32R-7680001 through 32R-7880068.

Designed as a cut-to-length cable assembly, the kit uses flexible 1-gauge M22759 copper cable, slim-head terminals and heat-shrink insulation. Bogert Aviation describes its copper cable kits as intended to reduce voltage drop between the battery and starter and support starting-system performance.

  • Manufacturer part number: 03M-KIT-PA-32R-300
  • Flexible 1-gauge M22759 copper cable assemblies
  • Slim-head terminals with heat-shrink insulation
  • Includes positive and negative battery cables
  • Manufacturer-supplied instructions, schematic, sample logbook entry and STC/AML documentation
  • Manufacturer states FAA/PMA approval under STC SA3531NM

Confirm aircraft serial-number applicability and installation approval requirements with appropriately qualified maintenance personnel before installation.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.