Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Bogert Cable Piper PA-39 C/R With Apu

https://www-old.roctexo.com/web/image/product.template/17725/image_1920?unique=4e1e357
Part numbers : RX1-12-03643 , 03M-KIT-PA-39 C/R W/ APU , 12-03643
Unit of Measure: EA

1260.09 EUR / EA 1260.09 EUR 1,260.09 € excl. VAT

1260.09 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

Bogert Aviation copper cable kit for Piper PA-39 C/R aircraft with APU configuration.

Manufacturer part number 03M-KIT-PA-39 C/R W/ APU. Bogert Aviation lists this kit for Piper PA-39 C/R aircraft, serial numbers 39-1 through 39-155.

The kit is supplied as cut-to-length, preassembled flexible 1-gauge M22759 copper cable assemblies with slim-head terminals and heat-shrink insulation. It is intended to provide a ready-to-install cable solution for the applicable battery and starter electrical system configuration.

  • Preassembled cable kit for the PA-39 C/R with APU configuration
  • Flexible 1-gauge M22759 copper cable
  • Slim-head terminals and heat-shrink insulation
  • Manufacturer states that installation instructions, schematic, sample logbook entry and STC/AML documentation are included
  • Manufacturer references FAA/PMA approval under STC SA3531NM; EASA approval or acceptance must be confirmed by the installer or operator before installation

Please verify aircraft serial number, installed configuration and applicable maintenance data before ordering or installation.

Manufacturer: Bogert Aviation

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.