Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Becker VHF Remote Tranceiver 10 W 8.33/25 Khz Spacing

https://www-old.roctexo.com/web/image/product.template/292377/image_1920?unique=8ef9bbe
Part numbers : RX1-13-26550 , RT6201-(010) , 13-26550
Unit of Measure: EA

1855.82 EUR / EA 1855.82 EUR 1,855.82 € excl. VAT

1855.82 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Becker Avionics RT6201-(010) is a remote-controlled VHF transceiver for airborne voice communications. It supports both 8.33 kHz and 25 kHz channel spacing, providing a practical solution for radio installations requiring remote equipment placement.

  • Manufacturer part number: RT6201-(010)
  • VHF frequency range: 118.000 to 136.990 MHz
  • Selectable 8.33 kHz and 25 kHz channel spacing
  • 2,280 channels in 8.33 kHz mode and 760 channels in 25 kHz mode
  • Transmitter output: minimum 6 W at 14 VDC and 10 W at 28 VDC into 50 Ω
  • Supply-voltage range: 10.25 to 33 VDC
  • VOX-controlled four-place intercom capability
  • Tandem-operation capability with the Becker RCU6201 remote control unit
  • Published RT6201/RT6211 unit weight: approximately 0.6 kg

The RT6201-(010) is listed by Becker Avionics under EASA approval EASA.21O.1249, with ETSO-2C37e and ETSO-2C38e conformity and TSO-C169a conformity.

Relevant manufacturer documentation includes the Becker 6200 Series data sheet, Operating Instructions, and AR/RT/RCU62 Installation & Operation Manual. Refer to the applicable Becker documentation for installation, configuration, operating limitations, and approval-status details.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.