Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Aveo Red Baron Mini LED Light Red

https://www-old.roctexo.com/web/image/product.template/114546/image_1920?unique=8ef9bbe
Part numbers : RX1-11-15481 , AVE-RBMPR-0SA , 11-15481
Unit of Measure: EA

519.45 EUR / EA 519.45 EUR 519.45 € excl. VAT

519.45 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Aveo RedBaron Mini DayLite is a compact red LED anti-collision light with integrated strobe electronics. Manufactured under part number AVE-RBMPR-0SA, it is designed for 9–36 VDC electrical systems and does not require an external power supply or strobe unit.

Its low-profile housing measures 58 × 58 × 33.4 mm, supporting installations where available mounting space is limited. The light incorporates reverse-polarity, transient-voltage, under-voltage and over-voltage protection, as well as overheat protection. A synchronisation connection is provided for coordinated flashing with compatible Aveo lights.

  • Red LED anti-collision strobe light
  • Manufacturer part number: AVE-RBMPR-0SA
  • Operating voltage: 9–36 VDC
  • Red-strobe input current: 2.0 A at 14 VDC; 1.2 A at 28 VDC
  • Red-strobe input power: 28.0 W at 14 VDC; 33.6 W at 28 VDC
  • Flash rate: 50 cycles per minute
  • Environmental operating temperature: −55 °C to +85 °C
  • Recommended mounting hardware: M5 × 45 mm socket-head cap screw or equivalent; specified torque 3.0 Nm

Approval status: This light is not EASA/FAA approved and is not TSO certified. Verify suitability and regulatory compliance for the intended installation before use.

Manufacturer documentation: RedBaron Mini DayLite specification sheet.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.