Skip to Content
  1. All Products
  2. All Products
  3. Aveo Daylite Series Posistrobe 28 Volt
Select currency EUR
Aveo Daylite Series Posistrobe 28 Volt

Image for illustration only. It may show a product series rather than the exact product offered.

Aveo Daylite Series Posistrobe 28 Volt

https://www-old.roctexo.com/web/image/product.template/133695/image_1920?unique=76409cc
Part numbers : RX1-11-19764 , AVE-PSPSYW-D02 , 11-19764
Unit of Measure: EA

461.76 EUR / EA 461.76 EUR 461.76 € excl. VAT

461.76 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Aveo Engineering PosiStrobe DayLite™ 28VDC is a compact rear position and strobe LED light. Manufacturer part number AVE-PSPSYW-D02.

Designed for 18–36 VDC electrical systems, this unit combines steady position-light and strobe functions in a low-profile housing measuring 45.3 × 56 × 30 mm. The manufacturer specifies a weight of 67 g.

  • Rear position and strobe LED functions
  • Operating voltage range: 18–36 VDC
  • Strobe repetition rate: 48 cycles per minute
  • Recommended mounting screw size: M3 or #6-32
  • Specified operating temperature: −55 °C to +85 °C
  • Manufacturer-stated overheat, reverse-polarity, transient-voltage, under-voltage and over-voltage protection
  • Manufacturer-stated waterproof, dust-proof and vibration-proof construction
  • Synchronisation connection for compatible Aveo lights

Approval status: this light is not EASA/FAA approved and is not TSO certified. Confirm installation suitability and applicable airworthiness requirements before installation.

Documentation: Aveo PosiStrobe DayLite 28VDC specification sheet and wiring diagram.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.