Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Appareo Stratus Es Experimental Transponder With 3I Kit

https://www-old.roctexo.com/web/image/product.template/81110/image_1920?unique=8ef9bbe
Part numbers : RX1-11-16557 , 153010-000040/62 , 11-16557
Unit of Measure: EA

3377.52 EUR / EA 3377.52 EUR 3,377.52 € excl. VAT

3377.52 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Appareo Stratus ES with 3i Kit is an experimental-aircraft avionics package combining a 1090ES ADS-B Out transponder with the Stratus 3i ADS-B In receiver.

Stratus ES is designed to use an external GPS source, while the supplied Stratus 3i receiver is wired to the transponder and receives ADS-B and GPS information through the aircraft’s externally mounted antennas. The Stratus 3i also incorporates backup AHRS capability.

  • Manufacturer part number: 153010-000040/62
  • 1090ES Mode S extended-squitter ADS-B Out transponder
  • Stratus 3i wired ADS-B In receiver kit
  • Push-button interface with OLED display
  • Pressure-altitude monitoring
  • Power input: 9–36 VDC; typical power consumption: 15 W
  • Operating temperature: −20 °C to +55 °C
  • Approximate installed unit dimensions: 162 mm wide × 43 mm high × 273 mm deep
  • Approximate weight including rack and connectors: 1.5 kg

This configuration is intended for experimental aircraft and is not EASA/FAA approved. Installation should be carried out in accordance with the applicable Appareo installation instructions and the aircraft’s approved build or maintenance data.

Relevant manufacturer documentation: Stratus 3i Installation Guide.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.