Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Appareo Stratus 3 ADS-B Receiver

https://www-old.roctexo.com/web/image/product.template/85487/image_1920?unique=8ef9bbe
Part numbers : RX1-11-14468 , 153010-000061 , 153010-000061/ , 11-14468
Unit of Measure: EA

763.06 EUR / EA 763.06 EUR 763.06 € excl. VAT

763.06 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 1 EA ready to ship on Monday 2026-11-16
Order before 17:00 CET on Friday 2026-11-13

The Appareo Stratus 3 is a portable ADS-B receiver designed to provide compatible flight applications with received traffic, WAAS GPS position and supplemental flight data via its dedicated Wi-Fi network.

Manufacturer part number: 153010-000061.

  • Dual-band ADS-B traffic reception on 978 MHz and 1090 MHz.
  • Integrated WAAS GPS, AHRS, pressure-altitude sensor and flight-data recorder.
  • Supports compatible flight applications, including GDL 90 Open ADS-B mode for third-party apps when enabled.
  • Portable, battery-operated unit with internal ADS-B and GPS antennas; remote antenna connections are supported.
  • AHRS information is supplemental only and does not replace installed aircraft instruments or normal see-and-avoid procedures.

Important for European operations: the receiver uses UAT ground broadcasts for ADS-B weather. Appareo states that ADS-B weather is not available outside the United States, where UAT is not in use. Traffic reception and displayed information depend on local ADS-B infrastructure, aircraft equipage and operating conditions.

Documentation: Stratus 3 Pilot’s Guide (Appareo).

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.