Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Aithre Dual USB

https://www-old.roctexo.com/web/image/product.template/89839/image_1920?unique=8ef9bbe
Part numbers : RX1-11-19048 , ADUSBX02 , 11-19048
Unit of Measure: EA

286.79 EUR / EA 286.79 EUR 286.79 € excl. VAT

286.79 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 2 EA ready to ship on Monday 2026-11-16
Order before 17:00 CET on Friday 2026-11-13
Up to 10 EA ready to ship on Thursday 2026-11-19
Order before 17:00 CET on Friday 2026-11-13
11 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Aithre Dual USB Charge Port, part number ADUSBX02, is a panel-mount dual USB-A charging outlet for 12–18 V electrical systems. It provides two 5 V outputs rated at up to 2.5 A (12.5 W) each for charging compatible USB devices.

  • Two USB-A charging outlets
  • Output: 5 V, up to 2.5 A / 12.5 W per outlet
  • Input: 12–18 V DC
  • Industrial-style metal Amphenol USB interfaces
  • Onboard 7 A fuse for the unit and individual 3 A outlet fuses
  • Reverse-current, over-temperature and over-voltage protection
  • Two-wire installation; manufacturer recommends a 7.5 A aircraft-bus fuse
  • Includes an Aithre placard intended to cover non-precision panel cut-outs

Aithre publishes installation instructions and FAA NORSEE documentation for this charge port. These documents do not constitute EASA approval; confirm airworthiness, installation requirements and acceptance with the applicable authority and qualified maintenance personnel before installation.

Manufacturer part number: ADUSBX02
Roctexo part number: RX1-11-19048

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.