Skip to Content
  1. All Products
  2. All Products
  3. AirGizmos Wiring Repair Kit for Bose X Aviation Headset HR02
Select currency EUR
AirGizmos Wiring Repair Kit for Bose X Aviation Headset HR02

Image for illustration only. It may show a product series rather than the exact product offered.

AirGizmos Wiring Repair Kit for Bose X Aviation Headset HR02

https://www-old.roctexo.com/web/image/product.template/134240/image_1920?unique=8ef9bbe
Part numbers : RX1-11-20396 , HR02 , HR02 - XA10 , 11-20396
Unit of Measure: EA

70.57 EUR / EA 70.57 EUR 70.57 € excl. VAT

70.57 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 2 EA ready to ship on Thursday 2026-11-12
Order before 16:00 CET Today
Up to 3 EA ready to ship on Monday 2026-11-16
Order before 16:00 CET Today
6 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The AirGizmos HR02 Wiring Repair Kit is intended to refurbish the wiring of a Bose® XA10 aviation headset. It provides two replacement cables from the headset control module, supporting replacement of both the upper headset cable and the lower cable assembly.

  • Manufacturer part number: HR02
  • Kit contents: upper cable between the ear pieces and control module; lower cable between the control module and general-aviation-compatible plugs
  • Upper cable length: approximately 1.09 m
  • Lower cable length: approximately 0.55 m
  • Unit of measure: Each

Suitable for maintenance of the specified headset wiring assembly. Refer to the manufacturer’s installation instructions before carrying out repair work.

Manufacturer installation instructions (PDF)

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.