Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Aerospace Logic Rotational Speed Sensor For Slick Magneto Unison A200-Hms

https://www-old.roctexo.com/web/image/product.template/120861/image_1920?unique=8ef9bbe
Part numbers : RX1-10-04807 , A200-HMS , 10-04807
Unit of Measure: EA

323.23 EUR / EA 323.23 EUR 323.23 € excl. VAT

323.23 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Aerospace Logic A200-HMS is a Hall Effect rotational speed sensor designed for Slick/Unison unpressurised magnetos. Precision-machined from 6061-T6 aircraft-grade aluminium, the sensor installs in the magneto vent-hole location specified in the manufacturer’s installation instructions.

It provides a latched, pulse-width-modulated square-wave signal proportional to rotational speed. When used with the Aerospace Logic TM200 instrument, the manufacturer states an accuracy of 1 RPM.

  • Manufacturer part number: A200-HMS
  • Hall Effect rotational speed sensor
  • For Slick/Unison unpressurised magnetos
  • Output: latched PWM square wave, 0 to 30 V maximum
  • Power requirement: 3.8 to 30 V, 3 mA
  • Supplied with colour-coded cable, approximately 1.2 m long
  • Manufacturer identifies this sensor for use with the TM200X instrument

Installation should be performed in accordance with the applicable Aerospace Logic instructions and approved aircraft maintenance data.

Documentation: A200-HMS Installation Instructions, Rev. 1.1

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.