Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Aerospace Logic Fuel Level Resistive Float Five Tank FL205

https://www-old.roctexo.com/web/image/product.template/73728/image_1920?unique=86e6a0b
Part numbers : RX1-10-04435 , FL205 , 10-04435
Unit of Measure: EA

1252.75 EUR / EA 1252.75 EUR 1,252.75 € excl. VAT

1252.75 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Aerospace Logic FL205 is a five-tank airborne fuel level instrument for use with resistive float-type fuel senders. It provides graphical fuel-level indication for each tank together with a selectable digital quantity display for the selected tank.

  • Manufacturer part number: FL205
  • Supports up to five fuel tanks using resistive fuel senders
  • Graphical tank-level display from power-up
  • Selectable digital fuel quantity readout for each tank
  • Programmable colour indications to suit applicable aircraft markings
  • Selectable display units: US gallons or litres
  • Sunlight-readable LCD with internal and external intensity control
  • 6–36 VDC input; published power consumption: 100 mA
  • DB-25 interface connector
  • Approximate instrument dimensions: 62 × 62 × 23 mm; approximate weight excluding harness: 115 g

The FL205 is intended for aircraft-specific installation and calibration in accordance with the manufacturer’s current instructions and approved aircraft data. Refer to the manufacturer’s FL20X product manual and calibration documentation before installation or configuration.

Manufacturer product information and FL20X documentation

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.