Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Aerospace Logic Fuel Level Cessna Pennycap Two Tank FL212

https://www-old.roctexo.com/web/image/product.template/32110/image_1920?unique=4ccd7a6
Part numbers : RX1-10-04437 , FL212 , 10-04437
Unit of Measure: EA

917.49 EUR / EA 917.49 EUR 917.49 € excl. VAT

917.49 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Aerospace Logic FL212 is a two-tank fuel level instrument designed for use with Cessna Pennycap fuel level systems. It provides a modern digital presentation of fuel quantity while retaining use of the existing fuel senders specified for the system.

  • Manufacturer part number: FL212
  • Two-tank fuel level indication
  • Graphical fuel indication for each tank, with permanently displayed tank quantities
  • Selectable digital quantity display in US gallons or litres
  • Programmable colour indication to support required aircraft fuel markings
  • Sunlight-readable LCD with internal and external intensity control
  • 0 to 1.0 VDC signal input; selectable proportional or inverse sender orientation
  • 6 to 36 VDC input; DB-25 interface connector
  • Black anodised 6061 aluminium housing, approximately 62 x 62 x 23 mm

The manufacturer states that the FL212 uses existing fuel senders and lists TSO C55a, Canadian STC and FAA STC documentation. Installation approval, configuration and continuing-airworthiness requirements must be confirmed for the specific aircraft and authority before installation.

Manufacturer documentation and product information are available from Aerospace Logic.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.