Skip to Content
  1. All Products
  2. All Products
  3. AEROSHELL OIL 80 , PISTON OIL , CAN 1 QT // SAE-J-1966 Gº 40
Select currency EUR
AEROSHELL OIL 80 , PISTON OIL , CAN 1 QT // SAE-J-1966 Gº 40

Image for illustration only. It may show a product series rather than the exact product offered.

AEROSHELL OIL 80 , PISTON OIL , CAN 1 QT // SAE-J-1966 Gº 40

https://www-old.roctexo.com/web/image/product.template/325233/image_1920?unique=8ef9bbe
Part numbers : RX11-ASO80_1QT , ASO80_1QT , ASO80_1QT , 550050831 , 08-07507-1
Unit of Measure: EA

9.95 EUR / EA 9.95 EUR 9.95 € excl. VAT

9.95 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
48 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

AeroShell Oil 80 is a single-grade, straight mineral aviation piston-engine oil intended primarily for engine break-in periods. It is formulated without dispersant additives, apart from small quantities of pour-point depressant and antioxidant.

This SAE 40 oil meets SAE J1966 Grade 40 and is suitable where the applicable engine or overhaul documentation calls for a non-dispersant mineral break-in oil to this specification. Always follow the engine manufacturer’s or overhaul facility’s oil and break-in instructions.

  • Product: AeroShell Oil 80
  • Oil type: Straight mineral piston-engine break-in oil
  • Viscosity grade: SAE 40
  • Specification: SAE J1966 Grade 40
  • Pack size: 1 US quart can
  • Manufacturer part numbers: ASO80_1QT; 550050831

Manufacturer product information and technical documentation are available from Shell AeroShell.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.