Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

AeroLEDs Sunspot 46 Hx Landing Light With Pulse FAA PMA 9-40V

https://www-old.roctexo.com/web/image/product.template/20422/image_1920?unique=324789e
Part numbers : RX1-11-11411 , 01-2130-HX , 11-11411
Unit of Measure: EA

686.66 EUR / EA 686.66 EUR 686.66 € excl. VAT

686.66 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The AeroLEDs SunSpot 46 HX is an LED landing light in the PAR 46 form factor, identified by manufacturer part number 01-2130-HX. The HX version incorporates AeroLEDs’ integrated Pulse (wig-wag) functionality, with no external pulse controller required.

Designed for aircraft lighting installations using a standard PAR 46 mounting arrangement, the SunSpot 46 HX provides a bright white landing-light beam and is intended for 9–30.3 VDC electrical systems. AeroLEDs specifies 85 W maximum power consumption and a 20° × 20° beam pattern.

  • Manufacturer: AeroLEDs
  • Manufacturer part number: 01-2130-HX
  • Product type: LED landing light with integrated Pulse/Wig-Wag mode
  • Mounting format: PAR 46
  • Operating voltage: 9–30.3 VDC
  • Maximum power consumption: 85 W
  • Manufacturer-stated approval status: FAA-PMA/STC

The HX installation requires the additional wiring specified in the applicable AeroLEDs installation instructions. Installation and continued-airworthiness requirements should be reviewed before fitment.

Documentation: AeroLEDs SunSpot 46 HX/LX Installation Instructions

Important: AeroLEDs lists part number 01-2130-HX as discontinued.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.