Skip to Content
  1. All Products
  2. All Products
  3. Aeroduct CEET-20 Ducting 5 10Foot Piece
Select currency EUR
Aeroduct CEET-20 Ducting 5 10Foot Piece

Image for illustration only. It may show a product series rather than the exact product offered.

Aeroduct CEET-20 Ducting 5 10Foot Piece

https://www-old.roctexo.com/web/image/product.template/124171/image_1920?unique=b047315
Part numbers : RX1-05-12461 , CEET-20 , 05-12461
Unit of Measure: EA

192.97 EUR / EA 192.97 EUR 192.97 € excl. VAT

192.97 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

Thermoid Aeroduct® CEET-20 is a double-ply, black neoprene-coated flexible ducting section for hot or cold air applications and for conveying fumes. Supplied as one full-length 3.05 m piece with a nominal 127 mm internal diameter.

The CEET construction incorporates a wire helix between the ducting plies and a fabric liner on the inside diameter. The liner supports smooth airflow through tight bends and helps reduce air-friction loss compared with unlined ducting.

  • Manufacturer part number: CEET-20
  • Nominal internal diameter: 127 mm
  • Length supplied: 3.05 m full piece
  • Construction: double-ply neoprene-coated fibreglass ducting with internal fabric liner and wire support
  • Stated temperature range: approximately -54 °C to above 177 °C

Not recommended for conveying liquids, highly abrasive materials, or for negative-pressure applications. Confirm dimensional and system-suitability requirements before installation.

Manufacturer product information · Aeroduct aviation ducting and hose catalogue

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.