Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

ACK E-04R 406 ELT Retrofit Kit From E-01 With Whip Antenna Int

Hazardous product
Hazardous material Special shipping rules and carrier restrictions may apply.
https://www-old.roctexo.com/web/image/product.template/80971/image_1920?unique=8ef9bbe
Part numbers : RX1-11-09231 , E-04R , E-04R INT , 11-09231
Unit of Measure: EA

1082.53 EUR / EA 1082.53 EUR 1,082.53 € excl. VAT

1082.53 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The ACK Technologies E-04R is a retrofit kit for replacing an installed ACK E-01 emergency locator transmitter (ELT) with the ACK E-04 406/121.5 MHz ELT. Designed as a direct replacement for the E-01 installation, the E-04R allows retention of the existing E-01 mounting tray and straps, as well as the installed remote-control-panel arrangement.

The supplied E-04 ELT is GPS capable and accepts position input data from Garmin Aviation, Bendix/King Aviation and NMEA 0183 GPS sources. This version is supplied with a 250-knot whip antenna.

Manufacturer part numbers: E-04R / E-04R INT

Kit contents include:

  • E-04 121.5/406 MHz ELT
  • E-04.8 whip antenna
  • Audio alert and audio-alert cable
  • Electrostatic discharger
  • Female 4-pin DIN plug
  • Horizontal and vertical remote placards
  • Switch cover
  • E-04M Installation/Operation Manual

The retrofit kit is intended for aircraft already equipped with an ACK E-01. The existing remote control panel, remote cable, antenna coaxial cable, mounting tray and straps are retained from the E-01 installation.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.