Skip to Content
  1. All Products
  2. All Products
  3. A-810 Control 60 Black Knob
Select currency EUR
A-810 Control 60 Black Knob

Image for illustration only. It may show a product series rather than the exact product offered.

A-810 Control 60 Black Knob

https://www-old.roctexo.com/web/image/product.template/21788/image_1920?unique=1da098f
Part numbers : RX1-05-09260 , A-810-BL-0600 , ASS-05-09260 , 05-09260
Unit of Measure: EA

193.67 EUR / EA 193.67 EUR 193.67 € excl. VAT

193.67 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The ACS Products A-810-BL-0600 is a friction-lock control with a black knob and a nominal overall control length of approximately 1.52 m (60 in). The length is measured from beneath the panel nut to the end of the threaded shaft with the knob pushed in.

A knurled fitting beneath the knob provides adjustable operating tension, allowing the control position to be held as required. Rotate the fitting clockwise to increase friction and counterclockwise to reduce it.

  • Manufacturer part number: A-810-BL-0600
  • Black knob
  • Non-swivelling 1/4-28 threaded control-rod end
  • 1/2-20 panel-nut thread
  • PTFE-lined flexible casing

This standard A-810 control is not EASA/FAA approved. Verify dimensions, interface threads, installation requirements and aircraft eligibility against the applicable approved maintenance data before installation.

Documentation: ACS Products A-810 Control product information.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.