Skip to Content
  1. All Products
  2. All Products
  3. A-790 Control 84 Black Knob
Select currency EUR
A-790 Control 84 Black Knob

Image for illustration only. It may show a product series rather than the exact product offered.

A-790 Control 84 Black Knob

https://www-old.roctexo.com/web/image/product.template/6042/image_1920?unique=495c266
Part numbers : RX1-05-08084 , A-790-10-0840 , 05-08084
Unit of Measure: EA

233.91 EUR / EA 233.91 EUR 233.91 € excl. VAT

233.91 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The A-790 Control 84 Black Knob is a vernier control assembly with a solid stainless-steel wire end and black control knob. It is identified by manufacturer part number A-790-10-0840 and Roctexo part number RX1-05-08084.

The A-790 design combines push-button coarse adjustment with rotary fine adjustment. Its flexible casing is Teflon-lined to support low-friction operation and heat resistance in higher-temperature installation areas.

  • Vernier control with solid wire end
  • Black knob
  • Stainless-steel wire core: approximately 2.0 mm diameter
  • Maximum control travel: approximately 86 mm
  • Nominal control length: approximately 2.13 m (84 in), measured from beneath the panel nut to the end of the wire with the knob pushed in
  • Flexible Teflon-lined casing may be shortened as required during installation

Not EASA/FAA approved. Verify dimensions, routing, end configuration and suitability against the applicable aircraft maintenance data before installation.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.