Skip to Content
  1. All Products
  2. All Products
  3. 46171 Alcor CHT Meter Type J
Select currency EUR
46171 Alcor CHT Meter Type J

Image for illustration only. It may show a product series rather than the exact product offered.

46171 Alcor CHT Meter Type J

https://www-old.roctexo.com/web/image/product.template/73685/image_1920?unique=8ef9bbe
Part numbers : RX1-10-00996 , 46171 , 10-00996
Unit of Measure: EA

564.67 EUR / EA 564.67 EUR 564.67 € excl. VAT

564.67 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Alcor CHT Meter Type J, manufacturer part number 46171, is a compact aircraft cylinder head temperature gauge with a 2-1/4 in (approximately 57 mm) diameter dial and Celsius temperature indication.

Designed for direct monitoring of engine cylinder head temperature, the gauge is calibrated to 250 °C at 8.0 Ω and incorporates temperature compensation to support accurate readings in varying operating conditions. It operates without an external electrical power source.

  • Manufacturer part number: 46171
  • Instrument type: Cylinder head temperature (CHT) meter
  • Thermocouple type: J
  • Dial size: 2-1/4 in (approximately 57 mm) diameter
  • Temperature scale: Degrees Celsius
  • Calibration: 250 °C at 8.0 Ω
  • Black and yellow dial
  • Mounting hardware included
  • PMA/FAA approved, as stated in the supplied source material

Please verify the required instrument type, calibration and installation requirements against the applicable aircraft and engine documentation before purchase or installation.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.