Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

3M AC Tech AC-350 B-1/2 Fuel Tank Sealant - 3.5 Oz. Cartridge

https://www-old.roctexo.com/web/image/product.template/126026/image_1920?unique=8ef9bbe
Part numbers : RX1-09-05593 , 7000123232 , 09-05593
Unit of Measure: EA

78.47 EUR / EA 78.47 EUR 78.47 € excl. VAT

78.47 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
6 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

3M™ AC-350 B-1/2 is a two-part, fast-curing polysulfide aerospace sealant supplied in a 3.5 oz (approximately 100 g) cartridge. When mixed, the Class B material forms a thixotropic, non-sag paste for application by cartridge applicator or spatula.

Designed by 3M for aircraft integral fuel tank and fuselage sealing applications, AC-350 Class B sealants are formulated to resist aviation fuels and petroleum chemicals commonly encountered in aerospace service. The solvent-free formulation is designed to retain its shape and volume during cure.

  • Manufacturer: 3M
  • Manufacturer part number: 7000123232
  • Sealant class: B-1/2
  • Cartridge content: 3.5 oz (approximately 100 g)
  • Mixed colour: dark brown
  • Typical application time: 30 minutes at 25 °C and 50% relative humidity
  • Typical tack-free time: 3–4 hours; cure to minimum 30A hardness: less than 4 hours, under the same stated conditions

Refer to the current 3M Technical Data Sheet and Safety Data Sheet before use. Confirm material suitability, applicable specifications and approved maintenance data for the specific aircraft or component application.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.